Embrane Potentiometer
The potentiometers are customizable membrane position sensors with a flexible,
ultra-thin, light weight profile. It has 2 standard formations, strip and ring. Its low power
requirements and linear output make it the ideal position sensor for many applications.
1. Features:
Available in both ring and strip formations
Linear output
Resistance proportional to contact placement
IP65 dust proof, water proof(intense spray)
2. Physical properties
Thickness: 0.4mm(without back adhesive)
Connector: Optional
Length&width refer to item 4-Dimensional diagram
Substrate: Polyester
Optional back adhesive: 0.05mm, 3M 200MP adhesive
3. Typical performance
Resistance: Standard 10K ohms
Resistance tolerance: ±20%
Linearity: strip ±3%; ring ±5%
Actuation force: 100 grams
4. Dimensional diagram
4.1 standard type in strip formation
4.2 standard type in Ring formation
5. Standard connection options
For single channel potentiometer the standard connection is a 3-wire system with two
resistive output channels and one collector channel. It can also be a 2-wire system with one
resistive output channel and one collector channel.
Solder Tab
Square male pins
Female Receptacles with plain housing
Female Receptacles with Lock housing
The Potentiometer Sensor consists of a polyester film with excellent mechanical properties, a highly conductive material and a nanoscale pressure sensitive material. The top layer is a flexible film and a composite pressure layer on the top. The bottom layer is a flexible film and a composite conductive wire. Both through the double-sided adhesive paste to isolate the sensing area. When the induction zone is compressed, the lines that are disconnected from each other through the top layer of the pressure-sensitive layer conduction, the port resistance output value changes with the pressure.
Thickness | 0.35mm |
Shape | Flaky, flexible |
Actuation force | <20g Res.<=200KΩ |
Sensitivity range | <20g to 10Kg< |
Resolution | continuous |
Non-actuated resistance | >10M Ω |
Response time | <10ms |
Operating temperature | -40℃~+85℃ |
Life time | >1 million |
Repeatability Same part | +/-3%, Average R@1000g |
Repeatability part to part | +/-10% Average R@1000g |
Hysteresis | +10%,(RF+ - RF-)/FR+,1000g |
EDS | Not ESD sensitive |
Drift | <5%, 2.5kg load, 24H |
Rohs compliant | Yes |
Film Potentiometer Sensor Applications
1,Human-machine interface
When the force reaches the specified threshold, the switch contacts are closed and the threshold can be adjusted according to the application requirements.
Tread pressure analysis system |
Ultra - thin baggage measuring weights |
Identify unintentional or intentional touch |
Color balance quality control |
Touch interface force sensor |
Golf trainer |
Grip measurement |
2,Consumer Electronics
Flexible, durable,lightweight film force sensor can be used for the following consumer products
Pressure stylus |
Ultra-thin sensitivity adjustable keyboard |
3D touch |
Automatic switch headphones |
E-sports game keyboard |
3,Running & Health
Film Potentiometer sensor Lightweight, easy to integrate features are popular with smart wear, intelligent sports equipment industry.
Smart cushion | |
Smart insoles | |
Smart pillow | |
Kegel sports intelligence trainer | |
Smart mattress | |
Robot tactical feedback | |
Grip perception / detection |
Contact: Anlosi Yang
Phone: +86 186 8861 3545
Tel: +86 186 8861 3545
Email: anlosi@lgswitch.com
Add: Dazhou Industrial Zone, Shijie Town, Dongguan City, Guangdong, 523291 CN